User Tools

Site Tools


This is an old revision of the document!

DigiTenSK : 10GHz digital Super Keyer

This project is a test to make an easy to use and low cost front end for SDR @ 10GHz. First test will be done using FT8 for fun (certainly a modified version to not have a complicated oscillator sub system).


The project use the same Mixer as the VNA Refit project. Those mixer allow to use a lower frequency PLL, they embed a switchable LO doubler.

You can get the schematic , and the full project on GitHub please beware this project is still untested so you should ask for a status update if you plan to use it

This first version PCB was made at OSH Park, it may or may not be the definitive manufacturer of the project.

wiki/projects/digitensk.1623704530.txt.gz · Last modified: 2021/06/14 21:02 by f4ihx